Technicalities of the Serger is explained by bestsergerreviews.com

The serger machine is a very typical and technical machine that is used for sewing purpose. 2, 3, 4 or 5 threads can be efficiently handled by the machine so that a clean sewing can be expected by it. bestsergerreview can be expected to be found on the internet by people who have used the machine. Mentioned below are some of the technicalities that should be understood before working on it so that the information can come in handy.

bestsergerreview

  • Patterns of stitches – Numerous types of stitching patterns are possible by using this machine. It only depends upon what is being made. The most popular stitch is the four thread overclock stitch due to the strength and robustness in holding together most clothing types. While doing a bind hem, the three thread over clock stitch is performed but it is not as strong as the four thread overclock stitch. A two thread overlock stitch can also be done to finish raw edges but this should not be used for seams. The two thread flatlock stitch is very similar to a cover stitch but only some serger models are good for this type of stitch. Bestsergerreviews.com lists out rolled hem as being one of the specialties of the machine using which one can easily make a rolled hem by utilizing 2 or 3 contrasting threads.
  • Differential feed – Differential feed is the control that is used for the two sets of feeds which keep pushing the thread through the machine. A user can adjust the differential feed ratio so that a seam gets an even finish and there can be a ruffed-edge effect. As per best serger review, it is a very important aspect of the machine and should be carefully taken into account.

All these technicalities should be well understood by a user so that the stitching can be done effectively and in case of any emergency, necessary adjustments can be made.

 

spacer